Chassis Intrusion Connector; Front Panel Audio Connector - Asus P5QL/EPU - Motherboard - ATX User Manual

User manual
Table of Contents

Advertisement

8..
Front.panel.audio.connector.(10-1.pin.AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
P5QL/EPU
P5QL/EPU Analog front panel connector
• We recommend that you connect a high-definition front panel audio module to this
• If you want to connect a high-definition front panel audio module to this connector, set
9..
Chassis.intrusion.connector.(4-1.pin.CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch. Connect
one end of the chassis intrusion sensor or switch cable to this connector. The chassis
intrusion sensor or switch sends a high-level signal to this connector when a chassis
component is removed or replaced. The signal is then generated as a chassis intrusion
event.
By default, the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper
cap. Remove the jumper caps only when you intend to use the chassis intrusion
detection feature.
P5QL/EPU
P5QL/EPU Chassis intrusion connector
1-24
AAFP
connector to avail of the motherboard's high-definition audio capability.
the Front.Panel.Type item in the BIOS setup to [HD.Audio];.if you want to connect an
AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this
connector is set to [HD.Audio]..See section 2.5.3 Onboard Devices Configuration for
details.
PIN 1
PIN 1
HD-audio-compliant
Legacy AC'97
pin definition
compliant definition
CHASSIS
Chapter 1: Product introduction

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents